Readme Datei zur Product Design Suite 2013

Hier gibt’s die Readme-Datei in Englisch für die PDSU 2013.

Ein paar interessante Auszüge daraus:

Wie bereits kommuniziert, wird Windows Vista nicht mehr unterstützt.

Autodesk Product Design Suites supports the following operating systems:

• Microsoft Windows XP Professional, 32 bit - Service Pack 3
• Microsoft Windows XP Professional, 64 bit - Service Pack 2
• Microsoft Windows 7, 32 bit and 64 bit - Service Pack 1

Note: Microsoft Windows Vista, 32 bit and 64 bit are not officially supported.

Die Product Design Suite Ultimate 64 Bit braucht ca. 35 GB Festplattenspeicher.

Unter XP kann die Installation schon mal über 4 Stunden dauern!

Under certain circumstance installation times on Windows XP operating systems can be significantly extended. Install times longer than four hours have been seen when Autodesk Showcase and, or Autodesk 3ds Max Design are included in the list of products to install with the Autodesk Product Design Suite installer.

Inventor 2012 Installation nach dem Inventor 2013 installiert wurde, führt zu Problemen:

If you install Inventor 2012 after having installed Inventor 2013 the installation will fail with a Microsoft Visual C++ 2010 error. The failure occurs because the Inventor 2013 installer upgrades Microsoft Visual C++ 2010 to Service Pack 1 level (SP1). However, Microsoft Visual C++ 2010 SP1 is incompatible with Inventor 2012, which requires Microsoft Visual C++ 2010 without the service pack. The failure will also occur if Microsoft Visual C++ 2010 SP1 is installed via a Microsoft update or by installing other software that requires Visual C++ 2010 SP1. If you encounter this issue see technical support article TS18772151 for a solution.

Lösung dazu auch hier: Product Design Suite (PDS): Es wird nichts installiert

Product Design Suite Readme Links

• AutoCAD: http://www.autodesk.com/autocad-win-readme-2013-enu

• AutoCAD Mechanical: http://www.autodesk.com/autocad-mech-win-readme-2013-enu

• AutoCAD Electrical: http://www.autodesk.com/wikihelp-acadelectrical-install-2013-enu

• Showcase: http://www.autodesk.com/showcase-readme-2013-enu

• Vault and Vault Server: http://autodesk.com/wikihelp-vault-readme-2013-enu

• Inventor: http://autodesk.com/inventor-readme-2013-enu

• 3ds Max Design: http://autodesk.com/3dsmax-readme-2013-enu

• Navisworks Simulate: http://www.autodesk.com/navisworkssmlate-readme-2013-enu

• Alias Design: http://www.autodesk.com/alias-readme-2013-enu

• Sketchbook Designer: http://autodesk.com/sketchbookdesigner-readme-2013-enu

• Mudbox: http://www.autodesk.com/mudbox-readme-2013-enu