Inventor 2013: Systemanforderungen

http://usa.autodesk.com/autodesk-inventor/system-requirements/

Note: Microsoft .Net Framework 4.0 is required to successfully install Autodesk Inventor.

For General Part and Assembly Design (Typically Fewer than 1,000 Parts)

• Windows 7 (32-bit or 64-bit) Home Premium, Professional, Ultimate, or Enterprise edition (recommended), Windows XP Professional (SP3), or Windows XP Professional x64 Edition (SP2) ^{(7, 8)}
• Intel Pentium 4, 2 GHz or faster; Intel Xeon, Intel Core, AMD Athlon 64, or AMD Opteron or later processor ⁽⁹⁾
• 2 GB RAM ⁽¹⁰⁾
• Microsoft Direct3D 10 (recommended) or Direct3D 9 capable graphics card ⁽¹¹⁾
• DVD-ROM drive ⁽¹²⁾
• 1,280 x 1,024 or higher screen resolution
• Internet connection for web downloads and Subscription Aware access
• Adobe® Flash® Player 10 ⁽¹³⁾
• Microsoft Mouse-compliant pointing device
• Internet Explorer 6.x through 8
• Excel 2003 through 2010 for iFeatures, iParts, iAssemblies, thread customization, and spreadsheet-driven designs
• Microsoft .Net Framework 4.0

For Complex Models, Complex Mold Assemblies, and Large Assemblies (Typically More than 1,000 Parts)

• Windows 7 64-bit (recommended) or Windows XP Professional x64 edition (SP2)
• Intel Pentium 4, 2 GHz or faster; Intel Xeon, Intel Core, AMD Athlon 64, or AMD Opteron or later processor ⁽⁹⁾
• 8 GB RAM ⁽¹⁰⁾
• Microsoft Direct3D 10 (recommended) or Direct3D 9 capable graphics card ⁽¹¹⁾
• DVD-ROM drive ⁽¹³⁾
• Microsoft® Mouse-compliant pointing device
• 1,280 x 1,024 or higher screen resolution
• Internet connection for web downloads and Subscription Aware access
• Adobe Flash Player 10 ⁽¹³⁾
• Microsoft Internet Explorer 6.x through 8
• Microsoft Excel 2003 through 2010 for iFeatures, iParts, iAssemblies, thread customization, and spreadsheet-driven designs
• Microsoft .Net Framework 4.0

Notes

1. Autodesk® Inventor LT™ 2013 software is provided both as 32-bit application and as 64-bit application for installation and use on the corresponding operating system only.
2. English versions of Inventor LT will run on any language operating system. Other language versions of Inventor LT will run on operating systems of that same language.
3. Inventor LT 2013 is optimized to take advantage of the SSE2 extended instruction sets supported on Pentium 4, AMD Athlon 64, and AMD Opteron processors. Inventor LT 2013 will not install on computers that do not support SSE2. Several utilities are available on the Internet that report CPUID including supported instructions sets.
4. Autodesk recommends settings which allow Microsoft Windows to manage virtual memory as needed. There should always be at least twice as much free hard disk space as system memory (RAM).
5. Please refer to the Autodesk published graphics card information.
6. Inventor LT 2013 is available only on DVD (or electronic download in some situations). DVD-ROM drive is not required if installing using software download methods.
7. Autodesk® Inventor® 2013 software application is provided both as 32-bit applications and as 64-bit applications for installation and use on the corresponding operating system only. Autodesk® Vault Explorer 2013 is a 32-bit application for installation and use on either a 32-bit or 64-bit operating system.
8. Inventor and Vault must both be the same language on a given computer. English versions of these applications will run on any language operating system. Other language versions of these applications will run on operating systems of that same language.
9. Inventor 2013 has been optimized to take advantage of the SSE2 extended instruction sets supported on Pentium 4, AMD Athlon 64, and AMD Opteron processors. Inventor 2013 will not install on computers that do not support SSE2. Several utilities are available on the Internet that report CPUID, including supported instructions sets.
10. Recommended minimum RAM for using Inventor Tooling is 3 GB. In addition, Autodesk recommends settings which allow Microsoft Windows to manage virtual memory, as needed. You should always have at least twice as much free hard disk space as system memory (RAM).
11. Please refer to the Autodesk published graphics card information.
12. Inventor 2013 is available only on DVD media (or electronic download in some situations). CD media is no longer available. A DVD-ROM drive is not required if installing via electronic download. However, you will need 15 GB of hard disk space to accommodate the installation files and temporary files created during the installation.
13. The multimedia learning components of the Inventor Help system, such as the UI Video Tour, Command Reference, and Show Me animations, require Flash Player 10. If it is not already installed, you can download it from the Adobe website.